Alubook references (Topic: 99999)

The following is the current list of references used in Alubook:

[1] Aluminium-Taschenbuch, 15. Auflage, 3 B”nder

BandÝ1, Grundlagen und Werkstoff, (1995), 620s.

BandÝ2, Werkstofftechnologien, (1996), 500s.

BandÝ3, Weiterverarbeitung und Anwendung, (1997), 500s.

Aluminium-Verlag, D¸sseldorf (1995-97)

[2] Aluminium, MNC handbok nr 12, UtgÂva 2

Materialnormcentralen, Stockholm (1989), ISBN 91-7162-286-1

[3] Aluminium teknikk nr 4

Skanaluminium, Oslo (1983), ISBN none

[4] Aluminium Merkbl”tte

B1 Biegen von Aluminium-Halbzeug (1996)

B2 Spanen von Aluminum (1984)

V1 Gasschmelzschweissen von Aluminium (1990)

V2 Lichtbogenschweissen von Aluminium (1992)

V4 L–ten von Aluminium (1992)

V5 Nieten von Aluminium (1992)

V6 Verbinden von Aluminium durch Klebstoffe (1996)

Aluminium Verlag, D¸sseldorf

[5] Aluminum brazing handbook), Publ no 21

The Aluminum Association, Washington DC (1990)

[6] Machining Aluminium Information Bulletin 7

Aluminium Federation, Birmingham (1983), ISBN none

[7] Aluminium Workshop Practice; W. Hegmann

Aluminium Verlag, D¸sseldorf (1982), ISBN 3-87017-161-8

[8] Adhesives Handbook; 3rd ed, J. Shields

Butterworths, London (1984)

[9] Permanent Fasteners for Light-Weight Structures; K: Hoffer

Aluminium Verlag D¸sseldorf (1984), ISBN 3-87017-177-4

[10] Screw-joints in aluminium components; C.O. Bauer

Aluminium Verlag, D¸sseldorf (1982), ISBN 3-87017-166-9

[11] Aluminium Extrusions; A technical design guide

The Shapemakers Inf. Service, Birmingham (1991), ISBN none

[12] Limning av aluminium;

Gr”nges Technology, FinspÂng, utgÂva 2 (1989), ISBN none

[13] Brandteknisk Dimensionering, Petterson & ÷deen

Stockholm (1983), ISBN 91-38-04113-8

[14] NS 3478, Design Rules for Structural Members for Fire Resistance,

NBR, Oslo (1983), ISBN none

[15] NS 3471. Prosjektering av aluminiumkonstruksjoner.

Beregning og dimensjonering

NBR (1973), ISBN none

[16] European Recommendations for Aluminium Alloy Structures

Eccs Com. T2, (1983), ISBN none

[17] Aluminium Alloy Structures, F.M. Mazzolani

Pitman Advanced Publ. (1983), ISBN 0-273-08653-7

[18] Strength of aluminium, Cederic Marsh

Alcan Canada Products Limited, ISBN none

[19] Standardprofiler

Hydro Aluminium Profiler, ISBN none

[20] ProfilhÂndbok, Hydro Aluminium Profiler (1988), ISBN none

[21] Fire Protection Engineering

NFPA/SFPE, USA (1988), ISBN 0-87765-353-4

[22] Fire Protection Handbook

NFPA, USA (1981), ISBN 0-87765-199-x

[23] An Introduction to Fire Dynamics, Dougal Drysdale

John Wiley and Sons (1987), ISBN 0-471-90613-1

[24] Heat Transfer, J.P. Holman

McGraw-Hill Publ. Company (1990), ISBN 0-07-909388-4

[25] Verification of Fire Resistance of Construction Elements

and Structures Harald Landr–, SINTEF

Norwegian Fire Research Laboratory (1983), ISBN none

[26] Fire-Resistance Tests, ISO 834ñ1975 (E)Elements of Building Construction

UDC 69,02: 699,81: 620,1

[27] The Surface Treatment and Finishing of Aluminium and its alloys;

S.Wernick, R. Pinner and P.G. Sheasby, Finishing Publications Ltd.,

England (1987), ISBN 0-904477-09-6

[28] The Technology of Anodizing Aluminium; A.W. Brace and P.G. Sheasby

Technicopy Ltd., England (1979), ISBN 0 905228 081

[29] Project report: Weathering bloom and coating on anodised aluminium

Norwegian Anodizing Factories Society (NEF), Norway (1989), ISBN none

[30] Project report: Wear resistance surfaces on aluminium;

G. B–kmark, G. Holmbom and J. SidÈn, Institute of Machining

Technical research (IVF), Sweden (1990)

[31] Aluminum standards and data, Publ no 1 (1993)

The Aluminum Association, Washington DC

[32] Quench sensitivity consideration in developing an air cooled AlMgSi-alloy

for construction purposes, A. Maitland, A. Ried.

Second int. Al. extrusion technology seminar, Atlanta-77

[33] "Fatigue testing of aluminium Alloy HA 6060-44, HA 6063-79 and HA 6082-33.

Comparison of test results"DNV 90-1008; Stein Fredheim

[34] Corrosion of light metals; H.P. Godard, W.B. Jepson, M.R. Bothwell, R.L. Kane;

John Wiley and Sons, New York (1967)

[35] KorrosjonshÂndbok for aluminium

SINTEF report, STF34, A87116, 1987-10-22.

[36] Korrosjonsbestandige materialer i prosess- og sj–vannssystmer,

SINTEF report STF34 A90087, 1990-05-15

[37] Corrosion Engineering; F.G. Fontana, Third ed.

McGraw-Hill Book Company, New York (1986), ISBN 0-07-0221463-8

[38] Corrosion behaviour of wrought AlMgSi-alloys, O. Lunder,

SINTEF report STF34 F91087, 1991-04-30

[39] Application of aluminium for automobile chassis parts; Y. Komatsu et. al.,

Paper no. 910554, SAE Int. Congress, February 25-Marsh 1, 1991.

[40] Der Einfluss geringer Kupferzus”tze auf die Korrosionsbest”ndigkeit

von Aluminium und aluminiumlegierungen;

W.K. Johnson and T.E. Wright, Aluminium, Vol. 43, 490 (1967)

[41] Korrosion von Aluminium in niederlandischer Atmosph”re, J.W. Boon

and P. Breedveld, SAR/RSA/SAR 5/1981

[42] Aluminium Pechiney, Revue d'aluminium; M. Lashernes, Dec. 1982

[43] Br. Corros. J., W.A. Bell and H.S. Cambell, 1, 72, 1965

[44] Corrosion; L.L Sheir,

Newnes-Butterworths, London (1976), ISBN 0-408-00109-7

[45] Metals Handbook Ninth Edition Vol. 13 Corrosion

ASM International (1978), ISBN 0-8777170-007-7

[46] Korrosjon og katodisk beskyttelse av aluminium i sjøvann; T. Wenn and

K. Nisancioglu, SINTEF report STF34 F 91061, 1991-09-10.

[47] Corrosion of metals in Contact with Preservative-Treated Wood; F.G. Evans and

B. Nossen (in Norwegian). Report from Norsk Teknisk Institutt

[47] Guide-lines for the use of Aluminium with foods and chemicals, 5th ed.,

The Aluminum Association (1984)

[48] British Standard, BS CP 118 The Structural use of aluminium

[49] Norwegian Standard, NS 2672 Aluminium/Steel bolted joints - Assembly

[50] Norwegian Standard, NS 2672 Aluminium/Steel bolted joints - Rubber ferrules

[51] Norwegian Standard, NS 2672 Aluminium/Steel bolted joints - Insulated Spacers

[52] Aluminium, vol. 1; van Horn (ed.)

[53] Cleaning of anodized and coated aluminium facades; H. Hin¸ber,

Aluminium, 66 Jahrgang, 12, 1990

[54] Aluminium i transportindustrien. Korrosjonsegenskaper og prøvemetoder.

Sammenfattende rapport; J.M. Drugli, SINTEF report STF16 F79010; 1979-02-02

[55] Saunders, H. L.: "Welding Aluminium: Theory and Practice",

The Aluminum Association, Second Edition, June 1991, ISBN 89-080539

[56] Halmøy E.: "Sveiseteknikk", Compendium at the Department of materials

and processes, Norwegian Institute of Technology, 1991

[57] Alusuisse: "Schutzgasschweissen TIG und MIG von Aluminium Werkstoffen",

Ausgabe November 1989

[58] The European Aluminium Association: "ALUSELECT" A PC based computer

programme for aluminium alloy selection, 1992

[59] Berteig, H.: "Ikke destruktiv prøving av aluminium",

Kurskompendium i "Aluminium - Materialer, sammenføyning

og konstruksjon,NTH 1991

[60] Hval, M.: "Anvendelse av bruddmekanikk p aluminium - et litteraturstudium".

SINTEF report STF16 F87100, 1987-11-20

[61] Die Korrosionsbest”ndigkeit von Aluminium-Magnesium-Silizium-Legierungen;

F. Booth, Aluminium, Vol. 38, 213 (1962)

[62] Application of all aluminium automotive body for Honda NSX; Y. Komatsu et. al.,

Paper no. 910548, SAE Int. Congress, February 25-March 1, 1991

[63] Metallic materials. Specification handbook; Robert B. Ross,

E&FN Spon Ltd, London (1972), ISBN 419 10730

[64] Aluminium: Properties and Physical Metallurgy; J. E. Hatch

American Society for Metals, Ohio, USA (1984), ISBN 0-87170-176-6

[65] Aluminium viewed from within; D. Altenpohl,

Aluminium Verlag, D¸sseldorf (1982), ISBN 3-87017-138-3

[65a] Aluminium von innen betrachtet; D. Altenpohl, 5. edition in german

Aluminium Verlag, D¸sseldorf (1993), ISBN 3-87017-235-5

[66] Aluminium; BÝThundal

Almqvist & Wiksell L”romedel AB (1991), ISBN 91-21-58813-9

[67] Aluminiuml”ra

Gr”nges Technology, FinspÂng (1996)

[68] Goda rÂd vid Aluminiumsvetsning

Svetskommissionen (1997), 100s, ISBN 91-630-5056-0

[69] Aluminium i processindustrin

Skanaluminium, Oslo (1988), 36s, ISBN none

[70] Solidification characteristics of aluminium alloys

Skanaluminium, Oslo

Volume 1: Wrought alloys, (1986), 156s, ISBN 82-00-36380-5.

Volume 2: Foundry Alloys, (1990), 256s, ISBN 0-87433-119-6.

[71] Handbok f–r konstrukt–rer

Sapa (1995), 142s

[72] Eurocode 9: Design of aluminium alloy structures (draft).

[73] BKR 94, Boverkets Konstruktionsregler, BFS 1993:58 med ”ndringar BFS 1995:18.

[74] Welding Handbook, 8th edition, American Welding Society, Miami, USA

Volume 1 Welding Technology, (1987), 638s.

Volume 2 Welding Processes, (1991), 955s.

Volume 3 Materials and applications ñ part 1, (1996), 526s.

[75] TALAT, Training in Aluminium Application Technologies, EAA, Br¸ssel, (1995).

[76] Modern design principles, editor K. Jakobsen

Tapir Publishers, Norway (1988), ISBN 82-519-0858-2